مدونة - إتقان التسويق - دورات عبر الإنترنت للمسوقين المعاصرين

Harry Ryan Harry Ryan

0 دورة ملتحَق بها • 0 اكتملت الدورة

سيرة شخصية

3V0-41.22 Latest Practice Questions, 100% 3V0-41.22 Correct Answers

BTW, DOWNLOAD part of UpdateDumps 3V0-41.22 dumps from Cloud Storage: https://drive.google.com/open?id=1CIH3EK2eFBoj-UKlXbvJ7KYkr-6E7QE8

The number of questions of the 3V0-41.22 preparation questions you have done has a great influence on your passing rate. And we update the content as well as the number of the 3V0-41.22 exam braindumps according to the exam center. As for our 3V0-41.22 Study Materials, we have prepared abundant exercises for you to do. You can take part in the real 3V0-41.22 exam after you have memorized all questions and answers accurately. And we promise that you will get a 100% pass guarantee.

It is known to us that the privacy is very significant for every one and all companies should protect the clients’ privacy. Our company is no exception, and you can be assured to buy our 3V0-41.22 exam prep. Our company has been focusing on the protection of customer privacy all the time. We can make sure that we must protect the privacy of all customers who have bought our 3V0-41.22 Test Questions. If you decide to use our 3V0-41.22 test torrent, we are assured that we recognize the importance of protecting your privacy and safeguarding the confidentiality of the information you provide to us. We hope you will use our 3V0-41.22 exam prep with a happy mood, and you don’t need to worry about your information will be leaked out.

>> 3V0-41.22 Latest Practice Questions <<

100% 3V0-41.22 Correct Answers & Reliable 3V0-41.22 Test Vce

The UpdateDumps Advanced Deploy VMware NSX-T Data Center 3.X (3V0-41.22) PDF dumps file is a collection of real, valid, and updated 3V0-41.22 practice questions that are also easy to install and use. The 3V0-41.22 PDF dumps file can be installed on a desktop computer, laptop, and even on your smartphone devices. Just download UpdateDumps Advanced Deploy VMware NSX-T Data Center 3.X in 3V0-41.22 PDF Questions on your desired device and start VMware 3V0-41.22 exam dumps preparation today.

VMware Advanced Deploy VMware NSX-T Data Center 3.X Sample Questions (Q15-Q20):

NEW QUESTION # 15
Task 11
upon testing the newly configured distributed firewall policy for the Boston application. it has been discovered that the Boston-Web virtual machines can be "pinged" via ICMP from the main console. Corporate policy does not allow pings to the Boston VMs.
You need to:
* Troubleshoot ICMP traffic and make any necessary changes to the Boston application security policy.
Complete the requested task.
Notes: Passwords are contained in the user _readme.txt. This task is dependent on Task 5.

Answer:

Explanation:
See the Explanation part of the Complete Solution and step by step instructions.
Explanation
To troubleshoot ICMP traffic and make any necessary changes to the Boston application security policy, you need to follow these steps:
Log in to the NSX Manager UI with admin credentials. The default URL is
https://<nsx-manager-ip-address>.
Navigate to Security > Distributed Firewall and select the firewall policy that applies to the Boston application. For example, select Boston-web-Application.
Click Show IPSec Statistics and view the details of the firewall rule hits and logs. You can see which rules are matching the ICMP traffic and which actions are taken by the firewall.
If you find that the ICMP traffic is allowed by a rule that is not intended for it, you can edit the rule and change the action to Drop or Reject. You can also modify the source, destination, or service criteria of the rule to make it more specific or exclude the ICMP traffic.
If you find that the ICMP traffic is not matched by any rule, you can create a new rule and specify the action as Drop or Reject. You can also specify the source, destination, or service criteria of the rule to match only the ICMP traffic from the main console to the Boston web VMs.
After making the changes, click Publish to apply the firewall policy.
Verify that the ICMP traffic is blocked by pinging the Boston web VMs from the main console again.You should see a message saying "Request timed out" or "Destination unreachable".

NEW QUESTION # 16
SIMULATION
Task 16
You are working to automate your NSX-T deployment and an automation engineer would like to retrieve your BOP routing information from the API.
You need to:
* Run the GET call in the API using Postman
* Save output to the desktop to a text file called API.txt
Complete the requested task.
Notes: Passwords are contained in the user _ readme.txt. This task is not dependent on another. This task should take approximately 5 minutes to complete.

Answer:

Explanation:
See the Explanation part of the Complete Solution and step by step instructions Explanation:
To run the GET call in the API using Postman and save the output to the desktop to a text file called API.txt, you need to follow these steps:
Open Postman and create a new request tab. Select GET as the method from the drop-down menu.
Enter the URL of the NSX-T Policy API endpoint for retrieving the BGP routing table, such as https://<nsx-manager-ip-address>/policy/api/v1/infra/tier-0s/vmc/routing-table?enforcement_point_path=/infra/sites/default/enforcement-points/vmc-enforcementpoint Click the Authorization tab and select Basic Auth as the type from the drop-down menu. Enter your NSX-T username and password in the Username and Password fields, such as admin and VMware1!.
Click Send to execute the request and view the response in the Body tab. You should see a JSON object with the BGP routing table information, such as routes, next hops, prefixes, etc.
Click Save Response and select Save to a file from the drop-down menu. Enter API.txt as the file name and choose Desktop as the location. Click Save to save the output to your desktop.
You have successfully run the GET call in the API using Postman and saved the output to your desktop to a text file called API.txt.

NEW QUESTION # 17
SIMULATION
Task 1
You are asked to prepare a VMware NSX-T Data Center ESXi compute cluster Infrastructure. You will prepare two ESXi servers in a cluster for NSX-T overlay and VLAN use.
All configuration should be done using the NSX UI.
* NOTE: The configuration details in this task may not be presented to you in the order in which you must complete them.
* Configure a new Transport Node profile and add one n-VDS switch. Ensure Uplink 1 and Uplink 2 of your configuration use vmnic2 and vmnic3 on the host.

Complete the requested task.
NOTE: Passwords are contained in the user_readme.txt. Configuration details may not be provided in the correct sequential order. Steps to complete this task must be completed in the proper order. Other tasks are dependent on the completion Of this task. You may want to move to other tasks/steps while waiting for configuration changes to be applied. This task should take approximately 20 minutes to complete.

Answer:

Explanation:
See the Explanation part of the Complete Solution and step by step instructions Explanation:
To prepare a VMware NSX-T Data Center ESXi compute cluster infrastructure, you need to follow these steps:
Log in to the NSX Manager UI with admin credentials. The default URL is https://<nsx-manager-ip-address>.
Navigate to System > Fabric > Profiles > Transport Node Profiles and click Add Profile.
Enter a name and an optional description for the transport node profile.
In the Host Switches section, click Set and select N-VDS as the host switch type.
Enter a name for the N-VDS switch and select the mode as Standard or Enhanced Datapath, depending on your requirements.
Select the transport zones that you want to associate with the N-VDS switch. You can select one overlay transport zone and one or more VLAN transport zones.
Select an uplink profile from the drop-down menu or create a custom one by clicking New Uplink Profile.
In the IP Assignment section, select Use IP Pool and choose an existing IP pool from the drop-down menu or create a new one by clicking New IP Pool.
In the Physical NICs section, map the uplinks to the physical NICs on the host. For example, map Uplink 1 to vmnic2 and Uplink 2 to vmnic3.
Click Apply and then click Save to create the transport node profile.
Navigate to System > Fabric > Nodes > Host Transport Nodes and click Add Host Transport Node.
Select vCenter Server as the compute manager and select the cluster that contains the two ESXi servers that you want to prepare for NSX-T overlay and VLAN use.
Select the transport node profile that you created in the previous steps and click Next.
Review the configuration summary and click Finish to start the preparation process.
The preparation process may take some time to complete. You can monitor the progress and status of the host transport nodes on the Host Transport Nodes page. Once the preparation is complete, you will see two host transport nodes with a green status icon and a Connected state. You have successfully prepared a VMware NSX-T Data Center ESXi compute cluster infrastructure using a transport node profile.

NEW QUESTION # 18
SIMULATION
Task 9
TO prepare for Virtual machine migration from VLAN-backed port groups to an overlay segment in NSX. a test bridge has been configured. The bridge is not functioning, and the -Bridge-VM- is not responding to ICMP requests from the main console.
You need to:
* Troubleshoot the configuration and make necessary changes to restore access to the application.
Complete the requested task.
Notes: Passwords are contained in the user_readme.txt. This task is not dependent on another. This task should take approximately IS minutes to complete.

Answer:

Explanation:
See the Explanation part of the Complete Solution and step by step instructions Explanation:
To troubleshoot the bridge configuration and restore access to the application, you need to follow these steps:
Log in to the NSX Manager UI with admin credentials. The default URL is https://<nsx-manager-ip-address>.
Navigate to Networking > Segments and select the overlay segment that is bridged to the VLAN-backed port group. For example, select Web-01 segment that you created in Task 2.
Click Bridge > Set and verify the configuration details of the bridge. Check for any discrepancies or errors in the parameters such as bridge name, bridge ID, VLAN ID, edge node, etc.
If you find any configuration errors, click Edit and modify the parameters accordingly. Click Save to apply the changes.
If you do not find any configuration errors, check the connectivity and firewall rules between the overlay segment and the VLAN-backed port group. You can use ping or traceroute commands from the NSX Edge CLI or the vSphere Web Client to test the connectivity. You can also use show service bridge command to check the status of the bridge service on the NSX Edge.
If you find any connectivity or firewall issues, resolve them by adjusting the network settings or firewall rules on the NSX Edge or the vSphere Distributed Switch.
After resolving the issues, verify that the bridge is functioning and the Bridge-VM is responding to ICMP requests from the main console. You can also check the MAC addresses learned by the bridge on both sides of the network using show service bridge mac command on the NSX Edge CLI.

NEW QUESTION # 19
Task 13
You have been asked to configure the NSX backups for the environment so that if the NSX Manager fails it can be restored with the same IP address to the original primary Data Center that is in an Active / Standby configuration. Backups should be scheduled to run once every 24 hours as well as when there are changes published to the NSX environment. Ensure that backups are completed on their respective environment. Verify the backup file has been created on the SFTP server.
* Credentials needed to complete the task:

You need to:
* Verify that an SFTP server is available on the network and obtain SFTP Fingerprint.
* Configure NSX Backups via NSX Appliance Backup
* Configure Scheduling Criteria
Backup Configuration Criteria

Complete the requested task.
Notes: Passwords are contained in the user_readme.txt. This task is not dependent on other tasks. This task should take approximately 15 minutes to complete.

Answer:

Explanation:
See the Explanation part of the Complete Solution and step by step instructions.
Explanation
To configure the NSX backups for the environment, you need to follow these steps:
Verify that an SFTP server is available on the network and obtain SFTP fingerprint. You can use thesearch_web("SFTP server availability")tool to find some information on how to set up and check an SFTP server. You can also use thessh-keyscancommand to get the fingerprint of the SFTP server. For example,ssh-keyscan -t ecdsa sftp_serverwill return the ECDSA key of the sftp_server. You can compare this key with the one displayed on the NSX Manager UI when you configure the backup settings.
Configure NSX Backups via NSX Appliance Backup. Log in to the NSX Manager UI with admin credentials. The default URL is https://<nsx-manager-ip-address>. Select System > Lifecycle Management > Backup & Restore. Click Edit under the SFTP Server label to configure your SFTP server. Enter the FQDN or IP address of the backup file server, such as 10.10.10.100. The protocol text box is already filled in. SFTP is the only supported protocol. Change the default port if necessary. The default TCP port is 22. In the Directory Path text box, enter the absolute directory path where the backups will be stored, such as /data. The directory must already exist and cannot be the root directory (/). Avoid using path drive letters or spaces in directory names; they are not supported. In the Passphrase text box, enter a passphrase that will be used to encrypt and decrypt the backup files, such as VMware1!.
Click Save to create the backup configuration.
Configure Scheduling Criteria. On the Backup & Restore page, click Edit under the Schedule label to configure your backup schedule. Select Enabled from the drop-down menu to enable scheduled backups.
Select Daily from the Frequency drop-down menu to run backups once every 24 hours. Select a time from the Time drop-down menu to specify when the backup will start, such as 12:00 AM. Select Enabled from the Additional Backup Trigger drop-down menu to run backups when there are changes published to the NSX environment. Click Save to create the backup schedule.
Verify that a backup file has been created on the SFTP server. On the Backup & Restore page, click Start Backup to run a manual backup and verify that it completes successfully. You should see a message saying "Backup completed successfully". You can also check the status and details of your backups on this page, such as backup size, duration, and timestamp.Alternatively, you can log in to your SFTP server and check if there is a backup file in your specified directory path, such as /data.

NEW QUESTION # 20
......

Our 3V0-41.22 study materials cover three vertions, they can meet all your needs. You can choose differet versions according to your own needs. 3V0-41.22 PDF materilas is instant acess to downlod,if you like, it can be transformed into a paper version, you can put it into your bags. 3V0-41.22 Soft test engine and 3V0-41.22 oline test engine are also can be you choice, 3V0-41.22 online test engine using the online tool and it can also provide the record for your process, and 3V0-41.22 online test engine can practice online anytime. If you have the nees like this, just choose us.

100% 3V0-41.22 Correct Answers: https://www.updatedumps.com/VMware/3V0-41.22-updated-exam-dumps.html

VMware 3V0-41.22 Latest Practice Questions One week preparation prior to attend exam is highly recommended, 3V0-41.22 test question only needs 20 hours to 30 hours to practice, VMware 3V0-41.22 Latest Practice Questions We choose the international third party to ensure the safety of the fund, It is also a portable format, meaning the Advanced Deploy VMware NSX-T Data Center 3.X (3V0-41.22) dumps PDF can be accessed on smartphones, tablets, and laptops, The three formats of this VMware 3V0-41.22 study material are the desktop VMware 3V0-41.22 practice exam software, VMware 3V0-41.22 web-based practice test, and a 3V0-41.22 PDF format.

Lack of savings, less than perfect credit and stifling loads of student 3V0-41.22 loan debt are keeping millennials from home ownership, One reason why people buy smartphones today is the mobile Internet.

Realistic 3V0-41.22 Latest Practice Questions Help You to Get Acquainted with Real 3V0-41.22 Exam Simulation

One week preparation prior to attend exam is highly recommended, 3V0-41.22 Test Question only needs 20 hours to 30 hours to practice, We choose the international third party to ensure the safety of the fund.

It is also a portable format, meaning the Advanced Deploy VMware NSX-T Data Center 3.X (3V0-41.22) dumps PDF can be accessed on smartphones, tablets, and laptops, The three formats of this VMware 3V0-41.22 study material are the desktop VMware 3V0-41.22 practice exam software, VMware 3V0-41.22 web-based practice test, and a 3V0-41.22 PDF format.

What's more, part of that UpdateDumps 3V0-41.22 dumps now are free: https://drive.google.com/open?id=1CIH3EK2eFBoj-UKlXbvJ7KYkr-6E7QE8

Harry Ryan Harry Ryan

سيرة شخصية

الدعم