New RCNI Test Bootcamp - RCNI Actualtest

For customers who are bearing pressure of work or suffering from career crisis, RCNI learn tool of inferior quality will be detrimental to their life, render stagnancy or even cause loss of salary. So choosing appropriate RCNI test guide is important for you to pass the exam. One thing we are sure, that is our RCNI Certification material is reliable. With our high-accuracy RCNI test guide, our candidates can become sophisticated with the exam content. You only need to spend 20-30 hours practicing with our RCNI learn tool, passing the exam would be a piece of cake.

RUCKUS RCNI Exam Syllabus Topics:

Topic	Details
Topic 1	ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2 3 protocols, and ICX services, IPv4 IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.
Topic 2	ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.
Topic 3	Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.
Topic 4	RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.

>> New RCNI Test Bootcamp <<

RUCKUS RCNI PDF Dumps - Effective Preparation Material [2025]

Have similar features to the desktop-based exam simulator Contains actual RUCKUS RCNI practice test that will help you grasp every topic Compatible with every operating system. Does not require any special plugins to operate. Creates a RCNI Exam atmosphere making candidates more confident. Keeps track of your progress with self-analysis and Points out mistakes at the end of every attempt.

RUCKUS Certified Networking Implementer Sample Questions (Q21-Q26):

NEW QUESTION # 21
When running FastIron SPS08095e code, which step is required to define static routes?

A. Run the UFI code image for GZR08095h.
B. Upgrade to version SPS08095h or later.
C. Install the L3-prem license.
D. Change the ICX image version to SPR08095e.bin.

Answer: C

Explanation:
To define static routes on a device running FastIron SPS08095e code, it's essential to have the appropriate licensing in place.
* Understanding Licensing Requirements:
* RUCKUS ICX switches require specific licenses to enable advanced features.
* The "L3-prem" (Premium Layer 3) license unlocks advanced routing capabilities, including the ability to configure static routes.
* Verifying Current License Status:
* Access the switch's command-line interface (CLI).
* Execute the command show license to display the current licensing status.
* Check for the presence of the "L3-prem" license in the output.
* Installing the L3-prem License:
* If the "L3-prem" license is not installed, obtain it from RUCKUS Networks or an authorized distributor.
* Follow the official RUCKUS licensing guide for detailed installation instructions.
* Configuring Static Routes:
* Once the "L3-prem" license is active, enter global configuration mode by typing configure terminal.
* Use the ip route command to define static routes. For example: ip route [destination_network]
[subnet_mask] [next_hop_ip].
* After configuring, save the settings with the write memory command to ensure persistence across reboots.
References:
* For detailed information on licensing and feature sets, refer to the FastIron 08.0.95 (GA) Software Licensing Guide.

NEW QUESTION # 22
Which configuration steps will add untagged ethernet ports 1/1/1 and 1/1/2 and tagged ethernet port 1/2/1 to VLAN 10?

A. untagged ethernet 1/1/1 to 1/1/2
tagged ethernet 1/2/1
vlan 10
B. vlan 10
no tagged ethernet 1/1/1 to 1/1/2
tagged ethernet 1/2/1
C. untagged ethernet 1/1/1 to 1/1/2 vlan 10
tagged ethernet 1/2/1 vlan 10
D. vlan 10
untagged ethernet 1/1/1 to 1/1/2
tagged ethernet 1/2/1

Answer: D

NEW QUESTION # 23
Which two commands can be used to display the IP address of a device attached to a switch port? (Choose two.)

A. show arp
B. show interface
C. show interface brief wide
D. show mac-address all
E. show lldp neighbor detail

Answer: A,E

NEW QUESTION # 24
Which command will create VE 2 on an ICX running FastIron 08.0.95?

A. ICX(config-vlan-2)# vlan 2 name VE2
B. ICX(config-vlan-2)# enable
C. ICX(config-vlan-2)# interface ve 2
D. ICX(config-vlan-2)# router-interface ve 2

Answer: B

NEW QUESTION # 25
What is the maximum Wattage for a PoE+ interface with PoE overdrive enabled?

A. 0
B. 1
C. 2
D. 3

Answer: B

Explanation:
Power over Ethernet (PoE) technology allows network switches to deliver electrical power to connected devices over standard Ethernet cables. The IEEE 802.3at standard, commonly known as PoE+, provides up to
30 watts of power per port. RUCKUS enhances this capability with a proprietary feature called PoE+ Overdrive, which increases the maximum power output per port.
With PoE+ Overdrive enabled, a PoE+ interface on RUCKUS ICX switches can deliver up to 45 watts of power over two pairs of wires. This enhancement is particularly beneficial for devices that require more power than the standard PoE+ provision, such as advanced wireless access points or video conferencing systems.
It's important to note that the actual power delivered to the powered device (PD) is slightly less due to cable losses. For instance, while the Power Sourcing Equipment (PSE) may supply 45 watts, the PD might receive approximately 35.5 watts. This ensures that devices receive sufficient power even after accounting for transmission losses.
The availability of PoE+ Overdrive and the maximum power output per port can vary depending on the specific ICX switch model. For example, the RUCKUS ICX 7650 supports PoE+ Overdrive with a maximum output of 45 watts per port. Similarly, the ICX 7150-48ZP model offers PoE+ Overdrive capabilities.
For detailed information on PoE+ Overdrive capabilities and supported models, refer to the "Ruckus Power over Ethernet (PoE) Interoperability" document.

NEW QUESTION # 26
......

By keeping customer satisfaction in mind, Pass4sureCert offers you a free demo of the RUCKUS Certified Networking Implementer (RCNI) exam questions. As a result, it helps you to evaluate the RUCKUS Certified Networking Implementer (RCNI) exam dumps before making a purchase. Pass4sureCert is steadfast in its commitment to helping you pass the RUCKUS Certified Networking Implementer (RCNI) exam. A full refund guarantee (terms and conditions apply) offered by Pass4sureCert will save you from fear of money loss.

RCNI Actualtest: https://www.pass4surecert.com/RUCKUS/RCNI-practice-exam-dumps.html

Nick Reed Nick Reed

سيرة شخصية

New RCNI Test Bootcamp - RCNI Actualtest

RUCKUS RCNI Exam Syllabus Topics:

RUCKUS RCNI PDF Dumps - Effective Preparation Material [2025]

RUCKUS Certified Networking Implementer Sample Questions (Q21-Q26):

الدعم